Red Hat OpenShift Container Platform

The following table describes the configuration for static IP address assignment:

Table 71. `ipam` static configuration object
Field	Type	Description
`type`	`string`	The IPAM address type. The value `static` is required.
`addresses`	`array`	An array of objects specifying IP addresses to assign to the virtual interface. Both IPv4 and IPv6 IP addresses are supported.
`routes`	`array`	An array of objects specifying routes to configure inside the pod.
`dns`	`array`	Optional: An array of objects specifying the DNS configuration.

The addresses array requires objects with the following fields:

Table 72. `ipam.addresses[]` array
Field	Type	Description
`address`	`string`	An IP address and network prefix that you specify. For example, if you specify `10.10.21.10/24`, the secondary network gets assigned an IP address of `10.10.21.10` and the subnet mask of `255.255.255.0`.
`gateway`	`string`	The default gateway to route egress network traffic to.

Table 73. `ipam.routes[]` array
Field	Type	Description
`dst`	`string`	The IP address range in CIDR format, such as `192.168.17.0/24` or `0.0.0.0/0` for the default route.
`gw`	`string`	The gateway that routes network traffic.

Table 74. `ipam.dns` object
Field	Type	Description
`nameservers`	`array`	An array of one or more IP addresses where DNS queries get sent.
`domain`	`array`	The default domain to append to a hostname. For example, if the domain is set to `example.com`, a DNS lookup query for `example-host` is rewritten as `example-host.example.com`.
`search`	`array`	An array of domain names to append to an unqualified hostname, such as `example-host`, during a DNS lookup query.

Static IP address assignment configuration example

{
  "ipam": {
    "type": "static",
      "addresses": [
        {
          "address": "191.168.1.7/24"
        }
      ]
  }
}