|
The ingress section of the MicroShift config.yaml file defines the configurable parameters for the implementation of the OpenShift Container Platform IngressController API. All of the following parameters in this table are subsections in the ingress section of the MicroShift config.yaml.
|
|
This ingress subsection describes how client requests are logged. If the status field is empty, access logging is disabled. When the status field is set to Enabled, access requests are logged as configured with the accessLogging parameters and the accessLogging.destination.type is automatically set to Container.
|
accessLogging.destination
|
A destination for logs. The destination for logs can be a local sidecar container or remote. Default value is null.
|
accessLogging.destination.type
|
The type of destination for logs. Valid values are Container or Syslog.
-
Setting this value to Container specifies that logs should go to a sidecar container. When the destination type is set to Container, a container called logs is automatically created. Using container logs means that logs might be dropped if the rate of logs exceeds the container runtime capacity or the custom logging solution capacity. You must have a custom logging solution that reads logs from this sidecar.
-
Setting this value to Syslog specifies that logs are sent to a Syslog endpoint. You must configure a custom Syslog instance and specify an endpoint that can receive Syslog messages. You must have a custom Syslog instance. For example, Getting started with kernel logging.
|
accessLogging.destination.container
|
Describes parameters for the Container logging destination type. You must configure a custom logging solution that reads logs from this sidecar.
|
accessLogging.destination.container.maxLength
|
Optional configuration. The default value is 1024 bytes. Message length must be at least 480 and not greater than 8192 bytes.
|
accessLogging.destination.syslog
|
Describes parameters for the Syslog logging destination type. You must configure a custom Syslog instance with an endpoint that can receive Syslog messages.
|
accessLogging.destination.syslog.address
|
Required configuration when the Syslog destination type is set. Valid value is the IP address of the syslog endpoint that receives log messages.
|
accessLogging.destination.syslog.facility
|
Optional configuration when the Syslog destination type is set. Specifies the syslog facility of log messages. If this field is empty, the facility is local1. Otherwise, the field must specify one of the following valid syslog facilities: kern, user, mail, daemon, auth, syslog, lpr, news, uucp, cron, auth2`, ftp, ntp, audit, alert, cron2, local0, local1, local2, local3, local4, local5, local6, or local7.
|
accessLogging.destination.syslog.maxLength
|
Optional configuration when the Syslog destination type is set. The maximum length of the Syslog message. Message length must be at least 480 and not greater than 4096 bytes. If this field is empty, the maximum length is set to the default value of 1024 bytes.
|
accessLogging.destination.syslog.port
|
Required configuration when the Syslog destination type is set. The UDP port number of the syslog endpoint that receives log messages. The default value is 0.
|
|
Specifies HTTP cookies that you want to capture in access logs. If the httpCaptureCookies field is empty, access logs do not capture the cookies. Default value is empty. Configuring ingress.accessLogging.httpCaptureCookies automatically enables ingress access logging. For any cookie that you want to capture, you must also set the matchType and maxLength parameters.
-
For example:
httpCaptureCookies:
- matchType: Exact
maxLength: 128
name: MYCOOKIE
|
httpCaptureCookies.matchType
|
Specifies whether the field name of the cookie exactly matches the capture cookie setting or is a prefix of the capture cookie setting. Valid values are Exact for an exact string match and Prefix for a string prefix match.
-
If you use the Exact setting, you must also specify a name in the httpCaptureCookies.name field.
-
If you use the Prefix setting, you must also specify a prefix in the httpCaptureCookies.namePrefix field. For example, the settings of matchType: Prefix when the namePrefix is "mush" captures a cookie named "mush" or "mushroom" but not one named "room". The first matching cookie is captured.
|
httpCaptureCookies.maxLength
|
Specifies the maximum length of the cookie that is logged, which includes the cookie name, cookie value, and
one-character delimiter. If the log entry exceeds this length, the value is truncated in the log message. The ingress controller might impose a separate bound on the total length of HTTP headers in a request. The minimum value is 1 byte, maximum value is 1024 bytes. The default value is 0.
|
|
Specifies the exact name used for a cookie name match as set in the httpCaptureCookies.matchType parameter. The value must be a valid HTTP cookie name as defined in RFC 6265 section 4.1. The minimum length is 1 byte and the maximum length is 1024 bytes.
|
httpCaptureCookies.namePrefix
|
Specifies the prefix for a cookie name match as set in the httpCaptureCookies.matchType parameter. The value must be a valid HTTP cookie name as defined in RFC 6265 section 4.1. The minimum length is 1 byte and the maximum length is 1024 bytes.
|
|
Defines the HTTP headers that should be captured in the access logs. This field is a list and allows capturing request and response headers independently. When this field is empty, headers are not captured. This option only applies to plain text HTTP connections and to secure HTTP connections for which the ingress controller terminates encryption: for example, edge-terminated or reencrypt connections. Headers cannot be captured for TLS passthrough connections. Configuring the ingress.accessLogging.httpCaptureHeaders parameter automatically enables ingress access logging.
|
httpCaptureHeaders.request
|
Specifies which HTTP request headers to capture. When this field is empty, no request headers are captured.
|
httpCaptureHeaders.request.maxLength
|
Specifies a maximum length for the header value. When a header value exceeds this length, the value is truncated in the log message. The minimum required value is 1 byte. The ingress controller might impose a separate bound on the total length of HTTP headers in a request.
|
httpCaptureHeaders.request.name
|
Specifies a header name. The value must be a valid HTTP header name as defined in RFC 2616 section 4.2. If you configure this value, you must specify maxLength and name values.
|
httpCaptureHeaders.response
|
Specifies which HTTP response headers to capture. If this field is empty, no response headers are captured.
|
httpCaptureHeaders.response.maxLength
|
Specifies a maximum length for the header value. If a header value exceeds this length, the value is truncated in the
log message. The ingress controller might impose a separate bound on the total length of HTTP headers in a request.
|
httpCaptureHeaders.response.name
|
Specifies a header name. The value must be a valid HTTP header name as defined in RFC 2616 section 4.2.
|
|
Specifies the format of the log message for an HTTP request. If this field is empty, log messages use the default HTTP log format. For HAProxy default HTTP log format, see the HAProxy documentation.
|
|
Specifies whether access is logged or not. Valid values are Enabled and Disabled. Default value is Disabled.
-
When you configure either ingress.accessLogging.httpCaptureHeaders or
ingress.accessLogging.httpCaptureCookies, you must set ingress.accessLogging.status to Enabled.
-
When you set the ingress.status field to Enabled, the accessLogging.destination.type is automatically set to Container and the router logs all requests in the logs container.
-
If you set this value to Disabled, the router does not log any requests in the access log.
|
|
A reference to a kubernetes.io/tls type of secret that contains the default certificate that the MicroShift ingress controller serves. When routes do not specify their own certificate, the certificateSecret parameter is used. All secrets used must contain tls.key key file contents and tls.crt certificate file contents.
-
When the certificateSecret parameter is not set, a wildcard certificate is automatically generated and used. The wildcard certificate is valid for the ingress controller default domain and its subdomains. The generated certificate authority (CA) is automatically integrated with the truststore of the node.
-
In-use generated and user-specified certificates are automatically integrated with the MicroShift built-in OAuth server.
|
|
Authenticates client access to the node and services. As a result, mutual TLS authentication is enabled. If this parameter is not set, then client TLS is not enabled. You must set the spec.clientTLS.clientCertificatePolicy and spec.clientTLS.clientCA parameters to use client TLS.
|
clientTLS.AllowedSubjectPatterns
|
Optional subfield that specifies a list of regular expressions that are matched against the distinguished name on a valid client certificate to filter requests. This parameter is useful when you have client authentication. Use this parameter to cause the ingress controller to reject certificates based on the distinguished name. The Perl Compatible Regular Expressions (PCRE) syntax is required. You must set the spec.clientTLS.clientCertificatePolicy and spec.clientTLS.clientCA parameters to use clientTLS.AllowedSubjectPatterns.
|
When configured, this field must contain a valid expression or the MicroShift service fails. At least one pattern must match a client certificate’s distinguished name; otherwise, the ingress controller rejects the certificate and denies the connection.
|
|
|
Specifies a required config map that is in the openshift-ingress namespace. Required to enable client TLS. The config map must contain a certificate authority (CA) bundle named ca-bundle.pem or the deployment of the default router fails.
|
|
The metadata.name of the config map referenced in the clientTLS.clientCA value.
|
clientTLS.ClientCertificatePolicy
|
Required or Optional are valid values. Set to Required to enable client TLS. The ingress controller only checks client certificates for edge-terminated and re-encrypted TLS routes. The ingress controller cannot check certificates for plain text HTTP or passthrough TLS routes.
|
|
Sets the HTTP version for the ingress controller. The default value is 1 for HTTP 1.1. Setting up a load balancer for HTTP 2 and 3 is recommended.
|
|
Specifies when and how the ingress controller sets the Forwarded, X-Forwarded-For, X-Forwarded-Host, X-Forwarded-Port, X-Forwarded-Proto, and X-Forwarded-Proto-Version HTTP headers. The following values are valid:
-
Append preserves any existing headers by specifying that the ingress controller appends them. 'Append` is the default value.
-
Replace removes any existing headers by specifying that the ingress controller sets the headers.
-
IfNone sets the headers set by specifying that the ingress controller sets the headers if they are not already set.
-
Never preserves any existing headers by specifying that the ingress controller never sets the headers.
|
|
Defines the policy for HTTP traffic compression.
|
httpCompression.mimeTypes
|
Defines a list of MIME types to which compression should be applied.
-
For example, text/css; charset=utf-8, text/html, text/*, image/svg+xml, application/octet-stream, X-custom/customsub, in the, type/subtype; [;attribute=value] format.
-
Valid types are: application, image, message, multipart, text, video, or a custom type prefaced by X-. To see the full notation for MIME types and subtypes, see RFC1341 (IETF Datatracker documentation).
|
|
Describes how HTTP connections are handled if the connection times out before a request is received. Allowed values for this field are Respond and Ignore. The default value is Respond. Empty requests typically come from load-balancer health probes or preconnects and can often be safely ignored. However, network errors and port scans can also cause these requests. Therefore, setting this field to Ignore can impede detection or diagnosis of network problems and detecting intrusion attempts.
-
When the policy is set to Respond, the ingress controller sends an HTTP 400 or 408 response, logs the connection if access logging is enabled, and counts the connection in the appropriate metrics.
-
When the policy is set to Ignore, the http-ignore-probes parameter is added to the HAproxy process configuration. After this parameter is added, the ingress controller closes the connection without sending a response, then either logs the connection or incrementing metrics.
|
|
Specifies connections for which no request is received and logged. Log and Ignore are valid values. Empty requests typically come from load-balancer health probes or preconnects and can often be safely ignored. However, network errors and port scans can also cause these requests. Therefore, setting this field to Ignore can impede detection or diagnosis of network problems and detecting intrusion attempts. The default value is Log.
|
|
Describes custom error code pages. To use this setting, you must configure the httpErrorCodePages.name parameter.
|
|
Specifies custom error code pages. You can only customize errors for 503 and 404 page codes. To customize error code pages, specify a ConfigMap name. The ConfigMap object must be in the openshift-ingress namespace and contain keys in the error-page-<error code>.http format where <error code> is an HTTP status code. Each value in the ConfigMap must be the full response, including HTTP headers. The default value of this parameter is null.
|
|
Defines default router ports.
|
|
Default router http port. Must be in range 1-65535. Default value is 80.
|
|
Default router https port. Must be in range 1-65535. Default value is 443.
|
|
Defines a policy for handling new route claims, such as allowing or denying claims across namespaces.
|
routeAdmission.namespaceOwnership
|
Describes how hostname claims across namespaces are handled. The default is InterNamespaceAllowed. The following are valid values:
|
routeAdmission.wildcardPolicy
|
Controls how the ingress controller handles routes with configured wildcard policies. WildcardsAllowed and WildcardsDisallowed are valid values. Default value is WildcardsDisallowed.
-
WildcardPolicyAllowed means that the ingress controller admits routes with any wildcard policy.
-
WildcardPolicyDisallowed means that the ingress controller admits only routes with a wildcard policy of None.
|
|
Changing the wildcard policy from WildcardsAllowed to WildcardsDisallowed causes admitted routes with a wildcard policy of subdomain to stop working. The ingress controller only readmits these routes after they are recreated with a wildcard policy of None.
|
|
|
Default router status. Managed or Removed are valid values.
|
|
tlsSecurityProfile specifies settings for TLS connections for ingress controllers. If not set, the default value is based on the apiservers.config.openshift.io/cluster resource. The TLS 1.0 version of an Old or Custom profile is automatically converted to 1.1 by the ingress controller. Intermediate is the default setting.
|
|
The TLSProfile status shows the ciphers and the minimum TLS version of the configured security profile. Profiles are intent-based and change over time when new ciphers are developed and existing ciphers are found to be insecure. The usable list can be reduced depending on which ciphers are available to a specific process.
|
|
tlsSecurityProfile.custom
|
User-defined TLS security profile. If you configure this parameter and related parameters, use extreme caution.
|
tlsSecurityProfile.custom.ciphers
|
Specifies the cipher algorithms that are negotiated during the TLS handshake. Operators might remove entries their operands do not support.
|
tlsSecurityProfile.custom.minTLSVersion
|
Specifies the minimal version of the TLS protocol that is negotiated during the TLS handshake. For example, to use TLS versions 1.1, 1.2 and 1.3, set the value to VersionTLS11. The highest valid value for minTLSVersion is VersionTLS12.
|
tlsSecurityProfile.intermediate
|
|
|
|
|
Valid values are Intermediate, Old, or Custom. The Modern value is not supported.
|
|
Specifies options for tuning the performance of ingress controller pods.
|
tuningOptions.clientFinTimeout
|
Specifies how long the ingress controller holds a connection open while waiting for a client response before the server closes the connection. The default timeout is 1s.
|
tuningOptions.clientTimeout
|
Specifies how long the ingress controller holds a connection open while waiting for a client response. The default timeout is 30s.
|
tuningOptions.headerBufferBytes
|
Specifies how much memory is reserved, in bytes, for ingress controller connection sessions. This value must be at least 16384 if HTTP/2 is enabled for the ingress controller. If not set, the default value is 32768 bytes.
|
|
Setting this field not recommended because headerBufferMaxRewriteBytes parameter values that are too small can break the ingress controller. Conversely, values for headerBufferMaxRewriteBytes that are too large could cause the ingress controller to use significantly more memory than necessary.
|
|
tuningOptions.headerBufferMaxRewriteBytes
|
Specifies how much memory should be reserved, in bytes, from headerBufferBytes for HTTP header rewriting and appending for ingress controller connection sessions. The minimum value for headerBufferMaxRewriteBytes is 4096. headerBufferBytes must be greater than the headerBufferMaxRewriteBytes value for incoming HTTP requests. If not set, the default value is 8192 bytes.
|
|
Setting this field is not recommended because headerBufferMaxRewriteBytes values that are too small can break the ingress controller and headerBufferMaxRewriteBytes that are too large could cause the ingress controller to use significantly more memory than necessary.
|
|
tuningOptions.healthCheckInterval
|
Specifies how long the router waits between health checks, set in seconds. The default is 5s.
|
tuningOptions.maxConnections
|
Specifies the maximum number of simultaneous connections that can be established for each HAProxy process. Increasing this value allows each ingress controller pod to handle more connections at the cost of additional system resources. Permitted values are 0, -1, any value within the range 2000 and 2000000, or the field can be left empty.
-
If this field is empty or has the value 0, the ingress controller uses the default value of 50000.
-
If the field has the value of -1, then the HAProxy process dynamically computes a maximum value based on the available ulimits in the running container. This process results in a large computed value that incurs significant memory usage compared to the current default value of 50000.
-
If the field has a value that is greater than the current operating system limit, the HAProxy processes do not start.
-
If you choose a discrete value and the router pod is migrated to a new node, it is possible that the new node does not have an identical ulimit configured. In such cases, the pod fails to start.
-
You can monitor memory usage for router containers with the container_memory_working_set_bytes{container="router",namespace="openshift-ingress"} metric.
-
You can monitor memory usage of individual HAProxy processes in router containers with the container_memory_working_set_bytes{container="router",namespace="openshift-ingress"}/container_processes{container="router",namespace="openshift-ingress"} metric.
|
tuningOptions.serverFinTimeout
|
Specifies how long a connection is held open while waiting for the server response to the client that is closing the connection. The default timeout is 1s.
|
tuningOptions.serverTimeout
|
Specifies how long a connection is held open while waiting for a server response. The default timeout is 30s.
|
tuningOptions.threadCount
|
Specifies the number of threads to create per HAProxy process. Creating more threads allows each ingress controller pod to handle more connections, at the cost of using more system resources. The HAProxy load balancer supports up to 64 threads. If this field is empty, the ingress controller uses the default value of 4 threads.
|
|
Setting this field is not recommended because increasing the number of HAProxy threads allows ingress controller pods to use more CPU time under load, and prevent other pods from receiving the CPU resources they need to perform. Reducing the number of threads can cause the ingress controller to perform poorly.
|
|
tuningOptions.tlsInspectDelay
|
Specifies how long the router can hold data to find a matching route. Setting this value too low can cause the router to fall back to the default certificate for edge-terminated, re-encrypted, or passthrough routes, even when using a better-matched certificate. The default inspect delay is 5s.
|
tuningOptions.tunnelTimeout
|
Specifies how long a tunnel connection, including websockets, remains open while the tunnel is idle. The default timeout is 1h.
|